modmasf2.abm (F2-CP128) – FACTS Engineering

10 REM ***

20 REM Use F2-CP128 as a Simple Modbus RTU Master

30 REM

40 REM Use FC 2 to Read RTU Input Status and put in C0

50 REM Use FC 4 to Read (3) RTU Analog Inputs and put in V2000,2001,2002

60 REM Use FC 5 to Write status of C1 to RTU Output

70 REM

80 REM Modbus Slave Address = 1 (RA)

90 REM Baud Rate = 9600 (BAUD)

100 REM Wait for First = 100 ms (WFF)

110 REM Wait for Last = 10 (3.5 Character Times Minimum)

120 REM Modbus Master Port = 2

125 REM ND=On Delay, FD=Off Delay, For Radio Communications

130 REM

140 REM ***

150 REM Allocate String Space and Configure Port 2

160 STRING 2561,255 : DIM LN(3)

162 RA=1 : BAUD=9600 : WFF=100 : WFL=10

170 SETPORT 2,BAUD,N,8,1,N,M : REM M (Multidrop) required for 2-wire RS485

175 SETPORT 1,9600,N,8,1,N

180 REM ***

190 REM Initialize Request Strings

195 REM Read Input Status Request String – FC2/Data Address 0/1 Bit

200 $(1)=CHR$(RA)+CHR$(2)+CHR$(0)+CHR$(0)+CHR$(0)+CHR$(1)

201 LN(1)=6

205 REM Read Analog Inputs Request String – FC4/Data Address 0/3 Words

210 $(2)=CHR$(RA)+CHR$(4)+CHR$(0)+CHR$(0)+CHR$(0)+CHR$(3)

211 LN(2)=6

215 REM Write Output Status Request String – FC5/Data Address 0

220 $(3)=CHR$(RA)+CHR$(5)+CHR$(0)+CHR$(0)+CHR$(0)+CHR$(0)

221 LN(3)=6

230 REM ***

240 REM Configure INPUT statement

245 IF WFL<10 THEN WFL=10 : REM WFL Must be 10 or greater

250 SETINPUT 1,1,0,255,WFF,WFL

300 REM ***

310 REM Read Input and Copy to C0

320 S=1 : GOSUB 1000

330 IF ERR<>0 THEN GOTO 300 : REM Continuous Retry

340 S205_C(0)=PICK(ASC($(0),4),B(0))

342 REM or S205_VH(40600)=ASC($(0),4)

344 REM If you use line 342 instead of 340 C0-16 will be overwritten

400 REM ***

410 REM Read Three Analog Inputs and Copy to V1400-1402

420 S=2 : GOSUB 1000

430 IF ERR<>0 THEN GOTO 400 : REM Continuous Retry

440 SHARED(128)=ASC($(0),5)

442 SHARED(129)=ASC($(0),4)

444 SHARED(130)=ASC($(0),7)

446 SHARED(131)=ASC($(0),6)

448 SHARED(132)=ASC($(0),9)

450 SHARED(133)=ASC($(0),8)

460 BMOVE W,VH(2000),VH(2003)

500 REM ***

510 REM Read C1 and write to RTU Output

520 IF S205_C(1) THEN ASC($(3),5)=255 ELSE ASC($(3),5)=0

530 S=3 : GOSUB 1000

540 GOTO 300

1000 REM ***

1010 REM Send Request and Get Response in $(0)

1020 $(0)=”” : INLEN2=0

1022 PRINT1 “Txd > “;

1024 FOR C=1 TO LN(S) : PRINT1 HEX$(ASC($(S),C),1),” “; : NEXT C

1026 REM PRINT1

1030 SYSTEM(2)=NOT(0) : REM Turn ON CRC

1040 DTR2=1 : DELAY ND

1050 PRINT2 USING(\LN(S)\),$(S);

1060 DELAY FD : DTR2=0

1070 REM Input RS485 Echo – Remove or REM next line for RS232 or 422

1071 SETINPUT 1,1,0,LN(S)+2,1,1 : INPUT2 ,$(4) : Z=INPLEN

1072 SETINPUT 1,1,0,255,WFF,WFL : INPUT2 ,$(0)

1080 SYSTEM(2)=0 : REM Turn OFF CRC

1082 PRINT1 : PRINT1 “Echo < “; : REM this line and next for RS232 or 422

1084 FOR C=1 TO Z : PRINT1 HEX$(ASC($(4),C),1),” “; : NEXT C

1085 PRINT1 : PRINT1 “Rsp < “;

1086 FOR C=1 TO INPLEN : PRINT1 HEX$(ASC($(0),C),1),” “; : NEXT C

1087 PRINT1

1089 ERR=0

1090 IF INPLEN=0 THEN PRINT1 “NO RESPONSE” : ERR=NOT(0) : RETURN

1100 IF COMERR2 THEN PRINT1 “CRC-16 ERROR” : ERR=NOT(0) : RETURN

1110 RETURN